Waves4 Software

 

The new data acquisition and processing software – Waves4 – is available now.

Click here for additional information

Note:

The software is free to download. Please send us an email (sales@datawell.nl) for a license of Waves4

For Windows:

Filename:

For Windows Vista / Windows 7 / Windows 8 / Windows 10
Waves4

 

 

Buoy Tester application

In order to troubleshoot your DWR4 and MKIII buoy before it is deployed we have developed the Buoy Tester application. 

This application is free to use and can be downloaded from this page:

Buoy Tester application

Buoy Tester manual



Datawell Library

 
The Datawell software library is available.

For Windows:

Filename:

For Windows Vista / Windows 7 / Windows 8 /  Windows 10

libdatawell 32-bit
libdatawell 64-bit


 

W@ves21 Software

              

The data acquisition and processing software – w@ves21 – is available now. Read more about the software here

Note:
 
The software is free to download. Please send us an email (sales@datawell.nl) for a license key of W@ves21.

For Windows:
Download W@ves21 v2.1.17 (10 MB).

Previous versions

W@ves21_v2.1.6_rfBuoy_v2.1.9.exe
9.17 MB
W@ves21_v2.1.12_rfBuoy_v2.1.16.exe 9.35 MB
Waves21_v2.1.11.exe 9.30 MB
Waves21_v2.1.12.exe
9.39 MB
Waves21_v2.1.12.update.exe 9.35 MB

 

GPS Gap repair software
In 2002 Datawell introduced a new technique to measure 3-dimensional motion with a single GPS receiver. The DWR-G wave buoys are based on this measurement technique. It features centimetre precision up to periods of 100 s at an attractive price-performance ratio. Occasionally gaps may occur. E.g. waves washing over the GPS antenna will block the GPS signals, leading to missing measurements, gaps. This technical note describes a method to largely repair these gaps, thus extending the use of DWR-G buoys. For your convenience the method has already been implemented in an associated program (GPSrepair.exe) that will directly repair HXV- or RDT-files.

GPS Gap repair software is available here


SeaSaw21

 

  

The data acquisition and processing software – SeaSaw21 – is available now. Read more about the software here. 

Note:
Please contact us if you would like to purchase the SeaSaw21 software or if you want to try the demo version.
You will need a software key to run SeaSaw21.
The key will be sent to you by our sales department.

Filename:
for Windows 9x / NT (with MSI installer)
SeaSaw21 v1.1.3 (ca 9MB). 

 

Acquisition software
Name Description Download
rfBuoy Used with Diwar, Warec, RX-D and RX-C receivers. rfBuoy v2.1.27
(ZIP file)
gsmBuoy Used to receive and decode SMS messages from buoys. gsmBuoy v1.0.7 (ZIP file)
oBuoy Used to receive and decode Orbcomm messages via e-mail. oBuoy v1.0.1
(MSI file)
iBuoy Used to communicate with internet capable buoys. Please note that buoys with GSM are also capable to communicate through the internet. Contact sales for more information. iBuoy v1.0.15
(ZIP file)
sbdBuoy
Used to receive and decode SBD messages via email from Iridium SBD equipped buoys.
sbdBuoy v1.1.16

 

Updates

 

gsmBuoy_v1.0.5.zip 3.61 MB
gsmBuoy_v1.0.7.zip 502.80 KB
iBuoy_v1.0.15.zip 450.59 KB
MOSE-G1000_v1.0.2.exe 6.40 MB
MOSE-G1000_v1.0.2.msi 3.51 MB
rfBuoy_v2.1.26.zip 556.30 KB